拼版海洋皮划艇建造过程 Duet 16 Kayak

这种皮划艇由4毫米Okoume胶合板和6盎司制成。 使用船用环氧树脂的玻璃纤维。 计划和工具包来自Watersdancing.com,用品来自Boatcraft.com。 这种皮划艇设计有木质座椅,但是,我决定使用三角洲座椅,因为它们可以轻松地前后调节,并且在需要时可以将前排座椅拆除。 这些座椅需要进行一些安装改动,并且前排座椅必须变窄才能容纳脚撑。 方向舵也来自达美航空,座椅和方向舵均购自埃德蒙顿的Boat Craft。 底部涂有额外的两层环氧/石墨层(90%/ 10%),以防磨损。 表面处理有4层Pettit 2015 Flagship Marine Varnish

This kayak is made from 4mm Okoume plywood and 6 oz. fiberglass using marine epoxy. Plans and kit are from Watersdancing.com and supplies from Boatcraft.com. This kayak was designed with wooden seats however, I decided to use the Delta seats as they can be easily adjusted fore and aft and the front seat removed if needed. These seats required some mounting modifications and the front seat had to be made narrower in order to accommodate the foot braces. The rudder is also from Delta and both seats and rudder were purchased from Boat Craft in Edmonton. Bottom was coated with two extra layers of epoxy/graphite (90%/10%) for abrasion protection. The finish has 4 coats of Pettit 2015 Flagship Marine Varnish